Pure Gold Synthetic Urine Unpacking and Review

Pure Gold synthetic urine is a 3.5 oz premixed solution designed to mimic human urine for passing drug tests.

In this review, I’ll unbox the kit, discuss its pros and cons, and show you how to use it to pass a drug test.

What’s in the kit

The urine quality is decent, which is good if your sample won’t be tested with UrineCheck 7 or other tests that detect synthetic urine.

I have an article where I reviewed the best synthetic urines you can safely use to pass a drug test.

This urine is suitable for both males and females.

The color of the urine seems a bit weird to me – it looks greenish.

For a drug test, you’ll need 1-1.5 oz of urine. The kit contains 3.5 oz, so there’s enough for 2 tests. However, there’s only one heat pad included, so you can only use the kit once.

The shelf life of the urine is 2 years. If you decide to use it twice, you need to freeze the remaining urine after opening the bottle because bacteria will start to grow, making the urine unusable.

Bottle

The bottle is flat and can fit in your pants or sock.

However, I prefer other methods to hide fake urine because putting it in your pants can make walking and using it inconvenient.

To hide this bottle, you need a stealth leg belt or another sneaking method.

The bottle comes with a temperature strip attached, so you can easily check the urine’s temperature before submitting the sample.

Some temperature strips can be inaccurate, which can lead to a failed drug test. I always check with a digital thermometer to ensure accuracy.

As you can see in the photo below, the thermometer shows 98°F, and the temperature strip shows something between 98°F and 100°F.

That’s accurate enough, so it’s safe to rely on this strip.

Cap

The kit has a flip-up spout cap, which is great.

The cap is included separately, so don’t forget to put it on the bottle before going to the drug test.

In the drug test room, most people are nervous, and unscrewing and screwing back the cap can be difficult, making it easy to spill the urine.

With the flip-up spout cap, it’s easy to open with one finger. The cap is tough to open, so it won’t accidentally spill under your clothes.

Heating methods

This kit includes a heating pad as a heating method. Heating pads are the most common way to keep urine warm for a drug test.

This kit includes only one heating pad, but there’s enough urine for up to two uses, which is strange.

As a result, you can use this kit only once unless you buy extra heat pads.

The pad is a regular heat pad used for warming hands or feet in severe environments. According to the information on the heat pad, it produces temperatures up to 160°F.

That’s too much and can overheat the urine. Imagine standing in the drug testing room, taking out the urine bottle, and seeing it’s overheated.

Temporarily overheating won’t ruin the urine, but you need a way to cool it down. You have only four minutes to submit the sample, so that can be a problem you don’t want to have.

Next, 160°F is too hot for the skin and can cause burns. If you hide the urine bottle with the attached heat pad in your pants, you definitely don’t want to feel extra heat and get skin burns.

The heat pad has an adhesive side, so you can easily attach it to the bottle, and it won’t fall off. This heat pad can keep warmth for up to eight hours according to the description.

I’d count on six hours to be safe. It takes about an hour to warm the urine to 100°F, so if you need to warm it quickly, you can microwave it.

How to use Pure Gold urine to pass a drug test

The kit comes with instructions printed on the box.

• Shake well, unscrew the cap, and remove the foil seal. Place the bottle in the middle of your microwave for 12-15 seconds.
• Ensure the temperature strip reads between 95-100°F.
• If the temperature strip does not display a reading right away, don’t worry. The product might be too hot or too cold. Give it a few seconds to register.
• If the reading is too low, reheat it for 5-10 seconds until the temperature is between 95-100°F. You can reheat the product as many times as necessary, but it should be used within 24-48 hours after removing the foil seal.
• After heating, replace the flip-top cap and shake the bottle well to eliminate any sediment at the bottom.
• Remove the self-adhesive heat pad from the plastic pouch and shake well to activate.
• Place the heat pad on the opposite side of the bottle from the temperature strip to ensure a correct reading.
• Leave the heat pad on the bottle for up to 8 hours to maintain the desired temperature.

A helpful hint is to store the bottle close to your body to help maintain the temperature.

If you don’t have a microwave, you can heat the product by applying the self-adhesive heat pad on the opposite side of the bottle from the temperature strip and storing the bottle close to your body.

Depending on the air temperature, the product could take up to 1 hour to reach the optimal temperature range of 95-100°F.

Conclusion

Pure Gold is a basic synthetic urine kit that can be used one time.

It’s cheap, so if you need to pass an unimportant drug test that you know won’t test for synthetic urine, you can give it a try.

However, if the outcome of the drug test is important for you, like for a life-changing job, I recommend using more reliable options.